Manual Clog Cannon High Pressure Air Power Drain Blaster Manual Toilets Bath Kitchen Sink Plunger Cleaner Pump Tools
1: Before you use your Clog Cannon, you’ll need to fill up its water chamber. To do so, turn the device so that the wider end is facing upward and fill it to the top without overflowing it.
2: After your device’s water chamber is full, quickly flip the tool and place it directly over your clogged drain.
3: Once you’ve flipped your device over on top of a sink, shower or bathtub drain, push down on the round black surface that you’ll see on the top of the device. If you push down hard enough, this will send water into the clogged drain and clean out the clog. However, if you push on it too lightly, you may need to push it again with more force to clean out the drain.
4: Finally, after you’ve completed the pushing step, remove your device from the sink and test out the drain to make sure it’s clear. If it’s not, repeat the pushing step once more.Notes:
1. Due to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!
2. Please allow 1-3mm measuring deviation due to manual measurement.
1 X Clog Cannon